SharkBite 1/2 tuuman palloventtiili, työnnöllinen messinkiputkiliitin, vesisulku, PEX-putki, kupari, CPVC, PE-RT, HDPE, 22222-0000LFA 1/2 tuuman venttiili

Name: SharkBite 1/2 tuuman palloventtiili, työnnöllinen messinkiputkiliitin, vesisulku, PEX-putki, kupari, CPVC, PE-RT, HDPE, 22222-0000LFA 1/2 tuuman venttiili
Brand: SharkBite
SKU: 0784497977426
Price: 47.46 EUR
Availability: InStock

Brand:SharkBite

3.8/5

€
47.46

TUOTTEEN KUVAUS SharkBite 1/2 tuuman palloventtiili SharkBite käyttää korkealaatuista messinkiä 1/2 x 1/2 messingistä push-to-connect palloventtiilissämme, jossa on yksi palloventtiilin kahva. Täysaukkoisen palloventtiilin ansiosta vesi pääsee kulkemaan venttiilin läpi helposti ja vapaasti luotettavalla vaihtoehdolla sulkea vedensyöttö nopeasti! LEIKATA. TYÖNTÄÄ. TEHTY. SharkBite Connection System tekee kaikista putkitöistä nopeaa ja helppoa ainutlaatuisen push-to-connect-teknologiamme ansiosta. Kun asetat putken SharkBite-pikaliittimiin, ruostumattomasta teräksestä valmistetut hampaat pureutuvat putkeen ja tarttuvat putkeen, kun taas erityisesti muotoiltu O-rengas puristuu ja luo täydellisen vesitiiviin tiivisteen. Ei juottamista, ei puristimia, ei liimaa. VALMISTAJALTA SharkBite on push-fit-liitäntäjärjestelmä, joka todella ottaa otteen. Se on helpoin tapa yhdistää kupari-, CPVC- tai PEX-putki missä tahansa yhdistelmässä - ilman juottamista, puristimia, liitoksia tai liimaa. Työnnä vain putki ja ruostumattomasta teräksestä valmistetut hampaat purevat alas ja tarttuvat tiukasti, samalla kun erikoisvalmisteinen O-rengas puristaa täydellisen tiivisteen. Purkaminen on yhtä nopeaa yksinkertaisella irrotustyökalulla. Joten liittimet ja venttiilit voidaan helposti vaihtaa ja käyttää uudelleen. Niitä voidaan jopa kääntää asennuksen jälkeen, mikä helpottaa asennusta ahtaissa tiloissa. Hanki SharkBite ja saat otteen seuraavasta putkityöprojektistasi. Nämä liittimet ovat lyijyttömät ja täyttävät kaikki Kalifornian ja Vermontin putkistojen vaatimukset.

Yksiköitä ei ole saatavilla

EAN: 0784497977426

Luokat Teollinen & Tieteellinen, Hydrauliikka, pneumatiikka ja LVI-tarvikkeet, Fittings, Valves, Palloventtiilit,

PRO: Kaikki SharkBite-liittimet täyttävät samat standardit kaupallisissa ja asuinympäristöissä. LAATU: Vain SharkBiten laatu ja suorituskyky on kentällä todistettu. SUORITUSKYKY: SharkBite-sulkuventtiilit ovat raskaita ja sertifioituja kestämään 200 PSI:n ja 200 Fahrenheit-asteen painetta. MONIPUOLINEN: Shark Bite Ball Valve -putkiliittimet sopivat kupari-, PEX-, CPVC-, PE-RT- ja HDPE-putkiin ja yhdistävät ne mihin tahansa yhdistelmään. ASENNUS SEKUNTEISSA: 1/2 tuuman pallovesiventtiili ei vaadi erikoistyökaluja, ei juottamista, ei puristamista tai liimaa; push-to-connect-muotoilu tarjoaa tehokkaan sovelluksen, joka säästää aikaa ja rahaa; vain paina luodaksesi vesitiiviin tiivisteen.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Color	‎Brass
Country of Origin	‎China
Customer Reviews	4.8 4.8 out of 5 stars 4,616 ratings 4.8 out of 5 stars
Exterior Finish	Brass
Exterior Finish	‎Brass
Finish	‎Brass
Included Components	‎Ball Valve
Inlet Connection Type	Cross Linked Polyethylene
Inlet Connection Type	‎Cross Linked Polyethylene
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	1.3 x 2.3 x 5.4 inches
Item Dimensions LxWxH	‎1.3 x 2.3 x 5.4 inches
Item model number	‎22222-0000LFA
Item Package Quantity	‎1
Item Weight	‎6.7 ounces
Manufacturer	‎Cash Acme
Material	Brass
Material	‎Brass
Number Of Pieces	‎1
Outlet Connection Size	0.5 Inches
Outlet Connection Size	‎0.5 Inches
Outlet Connection Type	PEX
Outlet Connection Type	‎PEX
Part Number	‎22222-0000LFA
Product Dimensions	‎1.3 x 2.3 x 5.4 inches
Shape	‎Inline
Size	‎1/2 in.
Style	‎Valve
Warranty Description	‎Lifetime

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: Mr. Dellbrook

First time using a push on ball valve

I added a shut off to the hot water exit pipe from the existing hot water heater. I did not want to do a solder joint because trying to rid all the dripping water from soldering process is a pain. For the 3/4 ball valve, I removed a 1-5/16" section of the existing copper pipe to insert the new push on fitting valve. With water turned back on....no joint leak!

Scritto da: meoff

NO MORE SWEATING

Had doubts at first but after reading reviews I replaced one outside valve and have to say that this is the best thing to come along since toilet paper!

Scritto da: Susan

Great product

Love the shark bite connectors.

Scritto da: Richard

You can do it!

No special skills needed. Pipe cutter or hacksaw and sandpaper. Clean off paint or corrosion. Cut out old valve. Push to connect new valve. Save a fortune.

Scritto da: mongoose

Works great

No leaks, easy push on install. Can’t ask for more.

Scritto da: james m.

Check size

Works well

Scritto da: Clinton A.

Can't beat a shark bite.

This was an easy install to replace an old shut off valve

Scritto da: fatty

Works Great!

Used this as a main water shut off to my house. It's operation is very smooth. The reason I used this shark bite valve is that it is easy to remove and replace if need be. The one I had installed years ago has lead in it which I just found out, and is not for potable water. Since it's well water and I have RO drinking water, I was not drinking the water but wanted to remove the valve for obvious reasons. This terrific valve will make future replacements a breeze without cutting pipes. I also used the fitting that converts from PVC to CPVC from well to house.

Scritto da: Amazon Customer

Easy install, does what it should.

Easy to install and works as it should. Well designed and quality manufacturing .

Scritto da: alcar

Shut the front tap!

I've been meaning (for 8 years now) to run a water line from our house into our attached garage. The main reason was for our fridge ice maker but I also wanted a hose access for those winter months. I finally decided to tackle the project. These are simply amazing. So easy to use and super fast. Once you prep your line properly, you simply push the line in the fitting, make sure it's seated all the way and Done! No more soldering. These are amazing especially for close quarters. Even if you mess up, you can simply remove them and fix your error. I have this one at the end of a temporary line that will go out the side of the garage this summer for an outside hose. (all the way to right of image) It's acting as cap right now but will be used to shut off the outside water during the winter months. Overall, these are a lifesaver. I know many people say these type of fittings don't last but I've seen homes that have had them for years with no leaks. I took a chance with these and I'm confident they will last a long time (hopefully forever). I highly recommend these especially if plumbing is not your thing. Pros: Super easy to install reusable solid, no leaks full brass fitting Cons: costly compared to normal fittings can only re-use so many times

Scritto da: Amazon Customer

unit easy to install

works like they say

Scritto da: J.R.

Easy to install

Wow, I am impressed at how easy this was to install on an existing line. And I have the coordination and manual dexterity of a 2-year-old. I wanted to put a shut off valve to the waterline feeding my outside faucet and prevent the line from freezing over during the winter. This works very well. Just push the line into the valve (with some force) until it no longer goes further in, do the same for the other side, you're done... well, clean the floor from some water dripping because you did not put a towel to catch it, and you're done! I would NOT have paid full price for this, but the discounted price made it a great purchase

Scritto da: ali a.

Easy to install

Good one