0
0

Teolliset testijärjestelmät SenSafe 481026 klooriton testiliuska

Brand:Industrial Test Systems

3.1/5

48.90

SenSafe Free Chlorine Water Check -testiliuskat ovat AINOA EPA:n hyväksymiä (julkaistu 2007 Federal Registerissä (osa 72, nro 47, maanantai, 12. maaliskuuta 2007, s. 11204, ITS-menetelmä D99-003)) testiliuskoja, joita käytetään juomaveden vaatimustenmukaisuuteen seurantaa. Niissä yhdistyvät laaja valikoima vedenlaadun tunnistusta patentoituun Free Chlorine -indikaattoriimme. Free Chlorine Water Check on suunniteltu kestämään monoklooriamiinien aiheuttamia häiriöitä, ja se on ihanteellinen tuote juomaveden laadun testaamiseen. SenSafe Free Chlorine Water Check on täydellinen sen määrittämiseen, onko sinulla oikea määrä desinfiointiainetta vai ei. Lisäksi veden laatutestin suorittamiseen ei tarvita ulkoisia kemikaaleja, joten testaus on nopeaa, helppoa ja edullista.

✅ MADE IN USA LAATU: ITS valmistaa testiliuskoja USA:n tehtaissaan ympäristössä, joka mahdollistaa uusittavuuden, tarkkuuden ja jäljitettävyyden hyvien valmistuskäytäntöjen perusteella. Laadunvalvontahenkilöstö testaa komponentit jokaisessa vaiheessa, ja ne hylätään, jos ne eivät vastaa vaatimuksia. ✅ TÄYDELLINEN SARJA: 50 testiliuskan pullo, jossa on tarkistettu värikartan pullon etiketti värien yhdistämisen helpottamiseksi. ✅ USEPA:n hyväksymä ilmainen klooritestiliuska juomaveden raportointitarkoituksiin käytettäväksi kunkin osavaltion harkinnan mukaan (ITS-menetelmä D99-003 julkaistu Federal Registerissä). ✅ HELPPO KÄYTTÄÄ: Yhden upotus- ja lukutestiliuskamenettely sekä optimoitu värikartta tekevät tuotteesta ihanteellisen sekä teknisille että ei-teknisille käyttäjille alhaisen vapaan kloorin havaitsemiseen vedestä – ihanteellinen juomaveteen, ravintoloihin, ravintoloihin ja muuhun juomavesi. ✅ TUNNISTUSTASOT: Vapaa kloori 0,0, 0,05, 0,1, 0,2 0,4, 0,6, 0,8, 1,2, 1,5, 2,0, 2,6, 4,0,> 6,0 ppm (mg/l) ei käytettäväksi laimentamattomissa kloori-, kloori- tai laimentamattomissa liuoksissa muita kloorittomia liuoksia. Ei reagoi joissakin vesijärjestelmissä käytetyn yhdistetyn kloorin (klooriamiinit) kanssa.
Country of Origin USA
Item model number 481026-BU
Manufacturer Industrial Test Systems, Inc.
Product Dimensions 1.5 x 1.5 x 3.25 inches; 1 Ounces

3.1

8 Review
5 Star
58
4 Star
17
3 Star
8
2 Star
4
1 Star
14

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: Savage designs
Better than some of the other test strips. But.
I have tested 3 different brands of test strips over a 7 day period and they did not correlate at all. 0.2 to 4.0 That is a huge difference when you are drinking the stuff. If you simply need to check if you have chlorine in your water these will work. If you need a definitive number go with a Taylor chlorine kit instead. For reference: I check my drinking water tanks for free chlorine every morning. When it gets below 0.2, I add 2.5 teaspoons of (drinking water approved) chlorine granules to a 2500 gallon tank. For our water usage, it will last a week before I need to chlorinate the tank again.
Scritto da: mark Romain
Accurate tests every time
Just follow the easy instructions and you will get results. The kit inspires customer confidence.
Scritto da: Jmmy
Great
Easy to use.
Scritto da: Shelby
Lots of duds
I went through 8 of these before getting one that worked. For what it's worth, the ones that did work were accurate.
Scritto da: Roberto
Easy to use and read
Easy test.
Scritto da: Scott
Totally Inaccurate Results
Purchased August 2022 to measure monthly Free Chlorine (TRC) from new septic system install for County Health Department. Always measured zero Free Chlorine, well below minimum required. Spent months with equipment manufacturer and installation contractor trouble-shooting system. Tried several types of chlorine tablets, etc. Finally had independent lab test and free chlorine was 0.99 mg/L. This test kit was defective! And could not return for refund because past the return date.
Scritto da: Todd Humphrey
Very poor accuracy, not trustworthy
I have done at least a dozen test very explicitly following the directions and the results are nowhere near compared to two other test. One test I’m using is liquid with the drops, another is a test strip that you dip. Both of those are indicating over 5 ppm this test is consistently giving .6 to 1.2 ppm. Both my other tests are highly rated for accuracy. They just are not easy to read anything under 2 ppm which is what I’m trying to achieve for my hot tub. I bought two bottles I will be returning one.
Scritto da: Stephen Hill
0 Results For My Tap Water...... Read the Product Discription Carefully
There was a 0 concentration as measured with my tap water.....but I know that my city uses Chlorine / Chloramines per information from my Orange County Calif water department. After reading more carefully the product description..."Does not react with combined chlorine (Chloramines)" Maybe I have Chloramines in my water supply?

Liittyvät tuotteet

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array