Triton Products 76528 DuraHook 5 tuuman 80 asteen taivutus 2-3/4 tuuman I.D. Sinkitty teräs kaksinkertainen suljetun pään Pegboard-koukku DuraBoardille tai 1/8 tuuman ja 1/4 tuuman Pegboard, 5-pakkaus 80 asteen taivutus 5 tuumaa

Name: Triton Products 76528 DuraHook 5 tuuman 80 asteen taivutus 2-3/4 tuuman I.D. Sinkitty teräs kaksinkertainen suljetun pään Pegboard-koukku DuraBoardille tai 1/8 tuuman ja 1/4 tuuman Pegboard, 5-pakkaus 80 asteen taivutus 5 tuumaa
Brand: Triton Products
SKU: 0819175000902
Price: 48.31 EUR
Availability: InStock

Brand:Triton Products

3.6/5

€
48.31

Yrittäjät, asunnonomistajat ja kaikenlaiset yksityishenkilöt etsivät aina tehokkaita autotalli- ja työkaluvarastoratkaisuja, jotka järjestävät, säästävät tilaa ja helpottavat kaikenlaisten laitteiden ja tarvikkeiden säilyttämistä. Vallankumouksellinen DuraHook on ihanteellinen valinta raskaaseen käyttöön lukittaviin pegboard-koukkuihin, ja se on yksinään korkealaatuisten ja monipuolisten säilytystuotteiden suhteen. DuraHook toimii hyvin myös Tritonin raskaan polypropeenilevyjärjestelmän DuraBoardin kanssa. DuraHooks ei koskaan pudota tai pudota työkaluja lattialle, mikä ansaitsee maineensa todellisena raskaan työkalun säilytysratkaisuna. Tästä syystä DuraHook tunnetaan myös nimellä -InchThe Stay Put Hook-Inch, ja Handyman Club of America suosittelee sitä. DuraHook-koukkua voidaan käyttää myös muiden Tritonin innovatiivisten tuoteperheiden kanssa. Tämä sisältää jousiklipsit ja BinClip(t), LocBinin DuraBoardin ja paljon muuta. Se riittää selviytymään kovimmista ja pelottavimmistakin organisaatio- ja varastointihaasteista.

Yksiköitä ei ole saatavilla

EAN: 0819175000902

Luokat Teollinen & Tieteellinen, Teollisuuden laitteistot, Koukut, Kiinnityslaudan koukut,

Kiinnikkeet asennetaan edestä, joten levyä ei tarvitse irrottaa durakoukkujen asentamista tai uudelleenasentamista varten. Koukut kiinnitetään pysty- ja vaakasuoraan neljään eri asentoon, mikä mahdollistaa useiden koukkujen käytön suurille, painaville ja oudonmuotoisille esineille. Käytä missä tahansa 1/8 tuuman tai 1/4 tuuman kiinnityslaudassa tai työkalulevyssä. Innovatiivinen kaksoislukitusjärjestelmä lukitsee koukun paikoilleen lukituskielekkeellä, joka kiinnittyy etulevyyn. Ihanteellinen ratkaisu letkujen, sähköjohtojen ja minkä tahansa pienten tai suurten esineiden säilyttämiseen, joissa on kahva, joka sopii mukana toimitetun koukun päälle.

Assembly required	No
Batteries required	No
Brand	Triton Products
Customer Reviews	4.6 4.6 out of 5 stars 15 ratings 4.6 out of 5 stars
Finish Type	Zinc
Finish types	Zinc
Included Components	Screws, Hooks
Item Dimensions LxWxH	6 x 8 x 2.5 inches
Item model number	76528
Item Weight	1.55 Pounds
Manufacturer	Triton Products
Material	Polypropylene, Alloy Steel, Zinc
Maximum recommended load	35 Pounds
Mounting Type	Wall Mount
Number of Hooks	5
Product Dimensions	6 x 8 x 2.5 inches
Style	80 Degree Bend

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: hp

Great, with a caveat for 1/4" metal pegboard

These hooks are the BEST when they work, but the screws my recent DuraHook purchases came with didn't work in my galvanized metal 1/4-inch pegboard (AlligatorBoard brand). When I bought some of these hooks a couple years ago they DID come with working screws. The screws I've received recently are slightly too small to hold in metal pegboard - by maybe about 1/32". Here are the kinds of screws I know of: 1. 1/4-inch screws the hooks I've ordered recently came with (too small for metal pegboard) 2. 1/8-inch screws the hooks also come with (have never used, this is for smaller pegboard) 3. 1/4-inch screws I received in the past (about 1/32-inch larger than the newer ones, work great in metal pegboard) You may see conflicting reviews on this site depending on what kind of pegboard people have and what kind of screws they received. I don't know if the manufacturer (Triton Products) changed the screws they use at some point or maybe there's another reason I received different screws at different times. In any case, I contacted the manufacturer and they were able to send me some of the slightly larger screws that work in metal pegboard. These work great, so you probably want this as Plan A. I wasn't able to find the right type of screws from anywhere other than Triton Products; it's an unusual screw made to hold in thin pegboard, with a very coarse thread and only 1/2" long. If you can't obtain the good screws, I explored a couple other options. If you can access the back of your pegboard, it's simple. Use bolts with nuts. If you can't and need a "blind hole" solution, one option I've found is "well nuts" also known as "rubber-insulated rivet nuts"; these are small rubber plugs with a threaded brass insert. When you tighten a bolt in them they compress and expand. It's not elegant but it works. The size you need is the 6-32 threaded, 1/4" hole size, 0.981" overall length. Pair it with a 1" 6-32 machine screw and perhaps an oversized #6 washer. The caveat with the well nuts is that they are almost an inch long, so you need some empty space behind your pegboard. The shorter well nuts I could find were too large in diameter to fit in the pegboard holes. If you don't have an inch behind your pegboard, you might be able to cobble something together by adding a lot of spacer washers to the long well nuts, or there are also non-removable blind rivets of various kinds (I haven't tried those). The DuraHook definitely will not work if you can't get a firm screw or bolt of some kind into your pegboard to hold them. If you have galvanized metal pegboard, don't plan on using the screws these hooks come with. (Though it's possible they work in some brands of metal pegboard, I don't know.)

Scritto da: L.Johnson

Comparing this to regular hooks it's a five star product.

I am very happy with the Triton products as a whole. I will say I got my board and all the hooks in one order. I painted the wall put up my new board and grabbed the hooks and just grabbed a bag of screws that was there in a pile by the hooks. Put the hook in the board grab the screw and it passed right through, didn't grab nothing but air. I reposistioned the hook, tried again still nothing, for about 5 minutes which felt like an eternity I tried to figure out what I was missing. Then I went back to the multiple bags of screws and noticed that some where bigger than others. I guess the smaller screws are for regular peg board and not the Triton board. Once up it has been great.

Scritto da: Rasta Kitty

Work great, arrived on time , cheaper than other sites

We are using these to hand ready made frames in our frame shop. They work great.

Scritto da: amy hunter

Heavy duty, but screws don't hold

I love all the Triton products I bought for my pegboard. They are built well, stronger than others, and the unique screw system makes them more secure than other pegboard hooks. The only reason I am not giving it five stars is because of the screws. They wouldn't stay in the pegboard. Kept falling out. So I searched through my extra screws and came up with some the exact same size that worked great. The difference is the screws that came with the product are rounded and the ones I found that work are totally flat topped. Don't know why that makes a difference but it's the difference between success and failure. So now I have to spend more money to go buy more of these flat top screws.

Scritto da: Kronin323

Superior product

These are some heavy duty hangars. Seems counter-intuitive to have the screw on the top instead of the bottom but it works quite well. Comes with two sets of screws of different sizes to accommodate different grades of pegboard. So if the screws don't your pegboard, try the other bag.

Scritto da: Larry G

Four Stars

wished I got a few more