VAIHTEISAvain 114 kpl. SAE/metrinen räikkähana - 82812 114 PC-sarja

Name: VAIHTEISAvain 114 kpl. SAE/metrinen räikkähana - 82812 114 PC-sarja
Brand: GEARWRENCH
SKU: 787721817901
Price: 458.93 EUR
Availability: InStock

Brand:GEARWRENCH

3.8/5

€
458.93

TUOTTEEN KUVAUS Tämä täydellinen sarja SAE Standard- ja Metric GEARWRENCH -kierretappeja ja -muotit ovat täydellinen mekaanikko- tai konepajalle, jolla on monenlaisia kierteitystarpeita. 48 hanaa ja 48 meistiä tarjoavat sinulle minkä tahansa tarvittavan koon, ja työkalumme on suunniteltu alusta alkaen tuomaan GEARWRENCH-innovaatioita ahkeralle käyttäjillemme, kuten T-kahvojen 5 räikkäpää tai patentoitu Twist Lock -ohjainjärjestelmä, joka kiinnittää kaikki pidennys tai leikkaustyökalu kahvaan, mikä tuottaa suoria kierteitä jokaisessa leikkauksessa. AMAZON.COM Täydellinen sarja kierre- ja meistityökalujen T-kahvajärjestelmää (katso suurempi). 114-osainen GearWrench Tap and Die -sarja (malli 82812) on ihanteellinen käytettäväksi ahtaissa ja ahtaissa tiloissa, ja patentoitu Twist Lock Guide System vähentää muotinohjaimen takakävelyä ja pitää muotit keskellä kierteitä leikkaamalla. Räikkäava T-avain tarjoaa 5 asteen räikkäkaaren, ja sen käännettävä vipu mahdollistaa nopeat vaihdot eteenpäin suunnasta taaksepäin, mikä eliminoi kädestä toiseen kääntymisen. PAKKAUKSEN SISÄLTÖ82800 iso räikkä T-avain, 82801 iso lukitushana-adapteri, 82802 iso kuusiokoloavain, 3881 keskikokoinen räikkäavain, 3883, keskikokoinen hanan sovitin, 3882 pieni hanan sovitin, 3884 keskikokoinen hanan sovitin, 3884 keskikokoinen suutinsovitin, 82083 naaras jatke8, 8208 3 jatkosovitin, liukuva T sovittimille, 4 mm kuusioavain, 5 ruuvinpoistoa, metrinen kierremittari, SAE-kierremitta, 48 tappia ja 48 meistiä TIETOJA VAIHTEIDEN VAIHTEISTA Alkuperäisen patentoidun 50 räikkäavaimen lanseerauksesta lähtien GearWrench on jatkuvasti johtanut läpimurtoja läpivientiräikkäreissä, pistorasiat, ruuvimeisselit, pihdit ja erikoistyökalut. Riippumatta toimialasta, jolla olet, GearWrenchillä on tarpeisiisi sopivat työkalut – tarkoista lähes tuhoutumattomiin. GearWrench-käsityökalujen käyttöikä on taattu materiaali- ja valmistusvirheistä. 82812 114 KAPPALE SUURI HAAN JA MÄÄRITYKSEN YHDISTELMÄ YHDESSÄ * Patentoitu Twist Lock -ohjainjärjestelmä vähentää stanssausohjaimen taaksepäin kulkemista * Automaattinen lukitusominaisuus mahdollistaa hanan sovittimen turvallisen poistamisen * Käännettävä vipu eliminoi käännettävän kädestä toiseen * Hiiliteräsrakenne * Elinikäinen takuu VALMISTAJALTA Hammasavain 114-osainen iso räikkähana ja laippasarja SAE/metriikka, joka koostuu: 82800 iso räikkä T-avain, 82801 iso lukitushana adapteri, iso 8280 kuusiokolokiinnityssovitin, 3881 keskikokoinen räikkäavain T-avain, 3883, keskikokoinen hanan sovitin, 3882 pieni hanan sovitin, 3884 keskikokoinen stanssausovitin, 82803 urosjatkeen sovitin, 82804 naaras jatkosovitin, liukuva T sovittimille, 4 mm kuusioavain, 5 ruuvia, metriset kierremittari, SAE-kierremittari, 48 tappia ja 48 meistiä. Täydellinen sarja 48 hanaa ja 48 meistiä sekä pieni, keskikokoinen ja suuri järjestelmä räikkä T-kahvoista, lukitushanan sovittimista ja kuusiomuotti adaptereista. Hanat ja suuttimet on valmistettu korkealaatuisesta työkaluteräksestä. Hammaspyöräavaimet räikkä -I-kahvajärjestelmät sopivat täydellisesti mekaanikkoon tai konepajaan. Sarjan mukana tulee puhallusmuovattu kotelo turvalliseen ja järjestettyyn säilytykseen. Katso lisää

Yksiköitä ei ole saatavilla

EAN: 787721817901

Luokat Työkalut & Kodinparannuslaitteet, Kone- ja käsityökalut, Käsityökalut, Kierteet ja suulat, Tap & Die Sets,

Aseman laajennussovittimet tarjoavat paremman pääsyn ahtaille alueille, kun niitä käytetään 3/8 tuuman asemalaajennusten kanssa. Automaattinen lukitusominaisuus mahdollistaa hanaadapterien turvallisen irrotuksen Puhallusmuottilaukku kallistetuilla hanan pidikkeillä helpon pääsyn ja säilytyksen helpottamiseksi. Sarja sisältää 2 räikkää T-kahvaa, 3 kokoa hanan sovittimia ja 2 kokoa muottisovitinta, 2 jatkosovitinta ja liukuvan T sovittimille 4 mm:n kuusioavain, 5 ruuvinpoistolaitetta, SAE- ja metriset kierremittarit sekä 48 kierretappia ja meistiä SAE- ja metrisissä kooissa 4 40 - 3/4" ja 3 mm - 18 mm. Muottiadapterit toimivat 3/8 tuuman Drive-läpiviennin räikkä- ja hylsyjärjestelmän sekä pistorasiatarvikkeiden kanssa. Räikkä t-avain toimii GEARWRENCH-läpivientijärjestelmän kanssa. Twist lock -ohjainjärjestelmä vähentää muotinohjaimen "takakävelyä" ja pitää muotit keskitettyinä leikkaamisen aikana. Räikkä T-kahvat tuulettimet 5° kääntökaarella ja niissä on peruutusvipu, joka estää kädestä kädestä kääntymisen.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎As Shown in the Picture
Country of Origin	‎Mexico
Customer Reviews	4.7 4.7 out of 5 stars 3,959 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Full Polish Chrome; taps & die are untreated
Included Components	‎
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎82812
Item Package Quantity	‎1
Item Weight	‎1.3 pounds
Manufacturer	‎GearWrench
Material	‎Steel
Measurement System	‎SAE & Metric
Part Number	‎82812
Power Source	‎Hand Powered
Product Dimensions	‎21 x 13 x 3 inches
Shape	‎Rectangular
Size	‎114 PC
Style	‎Set
Usage	‎Professional
Warranty Description	‎No Warranty - Consumable

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: OZ4

Works Great

Works as advertised!

Scritto da: nick radakovich

Value

Where I work taps are important an the quality is a must

Scritto da: Kenn

6 years and counting

Had these for six years and use them all the time as I restore a classic beetle to chase threads and other small projects. It’s a great set. The ratcheting handles are great, it’s all of great quality. Love this set.

Scritto da: Whilly whips

Worked great

Worked great as expected!

Scritto da: Tex

A great set with a lot to offer for this home-user.

I had read the reviews here before purchasing and especially took note of the people that reported some gouges in some of the machined taps with this set. I ordered anyway for a couple of reasons. First, this is no small company. It is part of Apex Tools that owns Lufkin Tapes, Crescent Tools, Wiss cutting tools, Nicholson Files and more etc that go back over 100 years. I have all of those tool Brands at home and they have served me exceptionally well for 30-40 years. So, I figured I'd give this set a go and if it was totally unacceptable, I could always return it (thanks to Amazon's service). Bottom-line, its not going back... I'm a home/hobbyist user of Tap and Dies, but I can understand why a Professional who uses these tools in a daily business setting can feel differently about what they need. But for my use at home, this is a great set, and for what you get, a very good price. I could not touch an equally configured Irwin/Hansen set for this price point. I have also used this set and it does a very acceptable job for my needs. Regarding the reports of the small gouges in some of the larger Taps, yes I have those too. But it is only on a couple of the Taps, the gouges are small, and the gouges are not on the cutting edges of the Taps. The cutting edges are clean, in tact and sharp. The very few gouges are on the threaded following surfaces, so that problem (for me) will not affect the tool's ability to cut proper threads. I did find that I needed to clean out a few loosely attached burrs from a couple of the Taps when they were machined. A small brass brush or even the "thread gauges" that come with this set easily dispatched those burrs. I have already used some of the Taps and they cut very well. The accessories that come with this set are quite remarkable and they work well too. I especially like the Tap Adapters that come with this set and they way they lock into the T-wrenches. My only complaint about the T-wrenches is that I can't lock the ratchet into place. You either go forward or backward via the selector flip/switch. If you have done much tapping of harder metals, you know that going forward and back quite often is needed to dislodge the burrs that you cut. I can accomplish it with the flip-lever, it would just be easier (at times) if the T-wrench didn't ratchet. But for cutting soft metal, I love that ratchet and the ability to move the handle without changing my grip is very appreciated. Overall, I think this set is a winner. I understand that it is not an Irwin/Hansen or even higher quality set. But for my use, that is OK and I expect to get many years of use from this set. I already have a much smaller, very cheap quality Tap and Die set that I've owned for 30+ years. Take care of your tools, use some finesse vs brute force, use cutting fluid, etc. and you can get many years even from a lesser quality Tap and Die set. :^) One update (4/23/16): I also purchased the Gator Tools V-Tap Guides that help keep the tap vertical (especially when starting the threads). The Gator Tools Tap Guide is a well made/machined part that earns a full 5-stars all by itself. Unfortunately, for this particular Tap set from GearWrench, on their smaller Taps (the Metric M5 and smaller) and (the Standard #10 and smaller), these Taps will not pass through the Big Gator Tools Tap Guide. That is because GearWrench makes the barrel (above the cutting portion of the Tap) slightly larger. Because of that design on their smaller Taps, it prevents the Tap from passing through the Big Gator Tape Guide. I've looked at these sizes in the Irwin Taps and it appears that Irwin maintains the barrel diameter so that it is not larger than the cutting portion diameter of the Tap. If something like this is important to you, then it may be worth considering Irwin vs GearWrench. I'm still happy with my GearWrench set and have some older Taps that will pass through the Big Gator tool just fine. Just thought I'd mention it as a difference for those considering this GearWrench set.

Scritto da: 338 Lapua Shooter

Good kit and good value

I purchased this kit about 5 years ago because I didn’t want to bring my snap on tap and die set to my shop where they would surely get lost or stolen by my staff. I didn’t have exceedingly high expectations of the kit but to be honest it’s just as good. As with any set you need to use a light cutting oil and as such I always use a thin oil. Over the years I have broken many bits and pieces of these types of kits, even my snap on ones and they always replace them…. But I have yet to break one of these. When I got my snap on brand products I was in the aftermarket automotive industry so I used them on a more routine basis, but now shifting careers to firearms I use different thread patterns and mostly the smaller ones which are far more prone to break, but these never have broken. To be entirely honest I paid almost half the price that they currently are selling for right now and since they’ve worked so well for me I’d have zero hesitation to buy a new set should I need them. The “big truck” brands I don’t think are any better and surely not worth the inflated cost which is likely 3-5 times as much as this kit. You’ll be happy with the kit.

Scritto da: Dexter See

Very good

Very good

Scritto da: Dustie Rose

High quality at a cheap price

For $210 I am extatic. This 114pc set performs just as good as my Snap-On set that has only HALF of the contents as this 114pc set and is twice the price. The ratcheting tap handles are elite, definitely a game changer when it comes to tight spots. Overall, I am very impressed with how these tap and die perform on both mild, stainless, and even aluminum. I would highly recommend this set to anyone.

Scritto da: ali

Very good

Great quality, love the ratchet

Scritto da: Laurence

Would love a refund or replacement

There seems a lot of play in the ratchet mechanism, and the ratchet direction lever has little resistance so when your removing the tap quickly the ratchet leaver keeps changing direction on its own account, this is extremely annoying,

Scritto da: Aivaras Ceida

Useless thing

Complete peace off ... Second time i used it and the centre ratchet mechanism fell out and i lost pressure spring

Scritto da: Mixx Cheang

Amazing!!

Very sharp and precise, bought a set of lang and did not fix a cross tread bolt almost snap the tool. Return it and bought gw tap and die set and work perfectly. Very happy with that tool safe a lot of time with the right tools.

Scritto da: MECANO

MECANO

bonjour l'outil est bien fait pour les endroit étroit merci.