WEN DPA131H Heavy Duty JT33 avaimeton porapuristin, jonka kapasiteetti on 1/64–1/2 tuumaa

Name: WEN DPA131H Heavy Duty JT33 avaimeton porapuristin, jonka kapasiteetti on 1/64–1/2 tuumaa
Brand: WEN
SKU: 0044459993841
Price: 74.45 EUR
Availability: InStock

Brand:WEN

3.3/5

€
74.45

Muistatko, kun sinulla oli täydellinen istukka? Kiinnitä teräsi WEN 1/2 tuuman avaimettomalla poraistukkalla. Tämä luotettava lämpökäsitelty teräsporaistukka toimii alle 0,004 tuuman (0,1 mm) iskulla maksimaalisen poraustarkkuuden saavuttamiseksi. JT33-kartiomme sopii täydellisesti mihin tahansa JT33-porakoneeseen, -sorviin tai -jyrsintään, ja se voidaan asentaa yksinkertaisella kumivasaran napautuksella. 3-leukainen istukka avautuu ja sulkeutuu ilman avaimia tai työkaluja. Istukka on yhteensopiva minkä tahansa halkaisijaltaan 1/64 - 1/2 tuuman poranterän kanssa. Universaali muotoilumme sopii monenlaisiin porakoneisiin, mukaan lukien WEN-porapuristimet 4208, 4210, 4210T ja 4212.

Määrä

Lisää ostoskoriin Osta nyt

EAN: 0044459993841

Luokat Työkalut & Kodinparannuslaitteet, Kone- ja käsityökalut, Konetyökalujen osat ja tarvikkeet, Koneellisten porakoneiden osat ja tarvikkeet, Poranterien jousipuristimet,

Yhteensopiva WEN-mallien 4208, 4210, 4210T ja 4212 porakoneen kanssa. Universaali muotoilu sopii mihin tahansa porakoneeseen, jyrsinkoneeseen tai CNC-sorviin, joissa on JT33-kara. Avaa ja sulje kolme istukan leukaa helposti ilman työkaluja tai avaimia. Pitää kiinni poranterät, joiden halkaisija on 1/64 - 1/2 tuumaa. Raskaaseen käyttöön valmistettu lämpökäsitelty poraistukka toimii alle 0,004 tuuman (0,1 mm) iskulla.

Batteries Required?	‎No
Brand	WEN
Compatible Devices	Lathe
Country of Origin	‎China
Customer Reviews	4.3 4.3 out of 5 stars 53 ratings 4.3 out of 5 stars
Included Components	Heavy Duty JT33 Keyless Drill Press Chuck with 1/64 to 1/2-Inch Capacity
Included Components	‎Heavy Duty JT33 Keyless Drill Press Chuck with 1/64 to 1/2-Inch Capacity
Item model number	‎DPA131H
Item Package Quantity	‎1
Item Weight	‎2.12 pounds
Manufacturer	‎WEN
Material	Alloy Steel
Material	‎Alloy Steel
Package Dimensions	‎4.37 x 2.24 x 2.24 inches
Part Number	‎DPA131H
Style	‎Keyless Chuck

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty^*

Arviosi

Scritto da: Steve

Decent Runout

Measured runout at the Chuck jaw to be.0035. This is very acceptable for the DIY and woodworking hobbyist

Scritto da: mike

Quality Chuck

I like the ease of use and heavy duty quality of this Chuck. Works perfectly on my drill press and makes changing bits a breeze.

Scritto da: Quality Conscious Doug

Extremely unbalanced! It shook my new WEN Drill Press so violently that it was unusable.

I recently bought a new WEN Drill Press, and love it. But, it came with an old fashioned Chuck that requires using a key. So, I bought this WEN chuck and an Arbor to install in place of the one that came with the Drill Press. To my surprise, either this chuck, or the Arbor, or both are extremely unbalanced. Together, they shook my drill press so violently that it was unusable. I should have immediately removed them and returned them. Unfortunately, I wasted weeks trying to communicate with WEN Customer Service and the retailer where I bought the Drill Press. Finally, I decided to remove them and install the original OEM Chuck and Arbor to see if the problem was actually the Drill Press. Well, with the OEM Chuck and Arbor installed, it ran buttery smooth. Perfect! Sadly, by then it was too late to return this Chuck and Arbor to Amazon, so I am out nearly $50. ( It should be noted that WEN does not sell an Arbor that can attach this Chuck to my WEN drill press, so the arbor was another brand. ) I have no way to tell which caused the problem, but my knowledge of engineering and physics suggests that the violent shaking was more likely caused by the chuck.

Scritto da: RDomke

Very good replacement socket.

Addition to my harbor freight drill press, Worth the money. Works Very well. :-)

Scritto da: Wade Pladson

Can’t get it to fit! Am I missing something?

Tried to contact the seller for help, no answer. It’s a Wen product, doesn’t fit my WEN drill press. Or I can’t figure it out. But the lack of d response is what I don’t like here.

Scritto da: Lou Rain

Immediate Shipping

I finally found the right keyless chuck for my Delta bench top drill press, after thinking it was a Jacobs 3. It turns our that no one stated this size around in dimension only the designation which is JT33. Very pleased with the delivery and working of the chuck.

Scritto da: John

Can't believe I didn't get this sooner!

There is nothing to dislike! Fantastic drill chuck. Only a quarter turn and the bit is ready to drill. My only question is why Wen doesn't put this on all of their presses on the assembly line? Absolutely worth the money and I highly recommend getting this chuck!

Scritto da: Kevin Heffernan

Fits my machine.

Love it !

Scritto da: Nick Sevastian

Returned

More than 1.5mm runout. Don't buy.