0
0

Yost Vises 480 8 Heavy Duty Utility -yhdistelmäputki ja penkkiruuvipuristimet 8 tuumaa

Brand:Yost Vises

3.8/5

770.64

Yost Vises Apprentice -sarjan putki- ja pöytäruuvipuristimessa on 360 astetta kääntyvä alusta ja se kiinnitetään työpenkkiin, jotta ne tarjoavat kiristystoiminnon kevyissä sovelluksissa. 360 astetta kääntyvä alusta, jossa on (2) lukitusta, säätää leukojen suunnan oikeaan asentoon. Jalustan lukitusnupin kiristäminen käsin varmistaa sen asennon. Ruuvisuojassa on valurautainen runko, jossa on teräksinen U-kanavatanko kestävyyden takaamiseksi, ja siinä on litteä osa, joka toimii alasimena ja lisätyötasona. Karkaistusta teräksestä valmistetut yläleuat voidaan vaihtaa, kun ne ovat kuluneet, ja sisäänrakennetut valurautaputken leuat on uritettu pidon parantamiseksi. Leuat tulevat lähemmäksi tai kauemmaksi toisistaan ​​kääntämällä ruuvipuristimen kahvaa myötä- tai vastapäivään.

TAKUU: Mukana 1 vuoden rajoitettu takuu ja 90 päivän palautus. TURVALLISUUSTIEDOT: Ruuvien väärinkäyttö voi aiheuttaa vakavia vammoja silmiin, käsiin ja tai muihin ruumiinosiin. Vises on asennettava ja käytettävä oikein. Ennen asennusta ja käyttöä lue, ymmärrä ja noudata kaikkia käyttöohjeessa olevia ohjeita. YOST VISES -LAATU: Jokainen Yost Vises -työkalu on suunniteltu täyttämään korkeat laatu-, lujuus- ja kestävyysvaatimukset. Arvostamme laatua määrän edelle ja valmistamme tuotteita, jotka ovat turvallisia ja helppokäyttöisiä. Tarjoamme elinikäistä teknistä tukea laatutakuumme tukemiseksi. KÄYTTÖ: Varmista, että ruuvipenkki on kiinnitetty tukevasti työpöytään ja että kääntyvän alustan lukko on kunnolla kiinni. Avaa ruuvipenkki kääntämällä ruuvipuristimen kahvaa vastapäivään. Aseta esine sahalaitaisten leukojen väliin. Sulje ruuvipenkki kääntämällä ruuvipuristimen kahvaa myötäpäivään, kunnes esine on tiukasti sahalaitaisissa leuoissa, jatka kiristämistä, kunnes et voi enää liikuttaa esinettä. Älä kiristä liikaa, sillä se voi vahingoittaa esinettä ja/tai ruuvipuristetta. Kun olet valmis käsittelemään esinettä, vapauta esine kääntämällä ruuvin kahvaa vastapäivään. KÄÄNTÖALUSTA: 360 astetta lukittuva (vaihteinen) kääntyvä alusta, jossa on (2) lukitus alas, säätää leukojen suunnan oikeaan asentoon; Pohjakiinnityskielekkeet: (4) x 11/16 (kiinnitystarvikkeet eivät sisälly toimitukseen). TEKNISET TIEDOT: Leuan leveys: 8,0 x Leuan aukko: 7,50 x Kurkun syvyys: 4,5”; Putken kapasiteetti: 1/8 x 3 Halkaisija, putken leuat on valettu paikalleen; 0. 67"D X 10.4" pitkä kahva kumipuskurilla; 4. 13" X 3. 63" iskevä pinta. YHDISTELMÄVISSI: Yost Vises 480 8-tuumainen hyötykäyttöinen putki- ja penkkiruuvipenkki on valmistettu 30 000 PSI:n valuraudasta, jossa on teräksinen U-kanavainen tanko. Se on varustettu suurella alasin työtasolla, siinä on myös vaihdettavat karkaistusta teräksestä hammastetut yläleuat ja suuri putkikapasiteetti pysyvä sahalaitainen putkileuka.
Brand Yost Vises
Color Blue
Item Dimensions LxWxH 11 x 11 inches
Item model number 480
Item Weight 80 Pounds
Manufacturer Yost Tools
Material Cast Iron with Steel U Channel Bar
Style Heavy Duty

3.8

13 Review
5 Star
80
4 Star
14
3 Star
4
2 Star
0
1 Star
2

Kirjoita arvostelusi

Sähköpostiasi ei julkaista. Kaikki pakolliset kentät on merkitty*

Scritto da: Doug Wade
Very nice vise. A lot more sturdy than I thought it would be
Shipped as advertised. Will last for years. The plastic pieces to fit on the jaws was not in my box.
Scritto da: Mike
Solid, sturdy, and smooth operation. Great vise.
I love this vise. I got the 5.5" one as an upgrade from my previous one which was often too small, or would slip on my workbench. My previous one was the kind that tightens itself on the the workbench but doesn't bolt in. The Yost 455 is the perfect size for my projects and allows me to bolt it down so it's easy to use. Let me share the bolts, washers, and locking nuts you will want to use for mounting this. There is some conflicting information in the Q&A and reviews. If you have a workbench where you can drill through the top, I can say definitively that the best way to mount it is use the base as a template and mark where the holes are in the base. Then use a 1/2" drill bit to drill holes through the tabletop. I used the following hardware which should work for anyone. You'll just need to adjust the bolt length for the width of your tabletop. Bolts: 1/2 in.-13 x 2-1/2 in. Hex Bolt (2.5" was the right length for my tabletop, you made need shorter or longer) Washers: 1/2 in flat washers with a 1 in outer diameter (OD) (1/2" inner diameter) Locking nuts: 1/2 in.-13 Nylon Lock Nut All the mounting hardware set me back about $11 at the local orange colored hardware store. It would have been nice if the hardware was included, but the vise itself is a great value regardless.
Scritto da: John Farrington
Solid and well made.
This is a solid and well made vise. Smooth, easy operation. This should last for years.
Scritto da: Tony
Good Value
I bought this blue Yost 455 Vise about 1 year ago and I am very happy with it. Most of my work is light duty, so I mounted it on a wooden work bench with a 2 x4 frame. For my light duty needs, I used 1/2" hex bolts to minimize 2 x 4 wall thickness loss. I then bought the RUITOOL brand blue colored 5.5" Vise Jaws Nylon Vise Block with Magnetic Soft Jaws, and I'm very happy with these soft jaws too. The Yost 455 and these soft jaws are an excellent match for my bench needs. If using a 2 x 4 frame for vise fastening, think about using a drill press or portable drill guide so that the drilled holes are straight. .
Scritto da: BaronR
No need to spend more
Very sturdy and good features.
Scritto da: Jeff
Vise has all the features of a bench vise.
Fit and function are good, it only weighs about 35 lbs, which means for a 5.5” vise its a bit light. Weight equates to sturdyness when looking at vises. It will work well for my needs.
Scritto da: Mattamuskeet
Poor QC
I tried buying a vise local first at Harbor Freight (HF), but returned due to poor casting and I wasn’t impressed by Home Depot’s offerings. I ordered the Yost 455 after a lot of research. Out of the box, this thing is not the best quality. The jaws do not line up and there is a lot of slop when the jaw is open. It also came with a nick in the metal from the manufacturer. Like the 5” “Central Forge” HF vise, this one is made in China, but at least the jaws lined up with no slop on the HF and it was only $60 compared to $85. Still this one is better in comparison and a decent value. I just wish they still made quality items in the US at a reasonable price because nothing I have bought from China has been what I would describe as 5 star quality.
Scritto da: William A McHale Jr
Great value!
I swore off buying any more garbage from harbor freight and figured that meant paying a lot of money for items like this. Yost company is from MI, USA. I couldn't figure out for sure where this is made but I don't care because I installed and used it today and am extremely happy with it. Build quality, fit and finish look great. Super value.
Scritto da: BL
Awesome tool
This seems to be of great quality for the price. Others I searched for were either too expensive or looked to be of cheap quality. Shown is a picture of it bolted to my workbench. For it's size it can open fairly large and the pipe jaw area is very handy to have as well. Also love the rubber gromets permanently attached to the handle. Rotating function is very useful and locks securely into position.
Scritto da: Aaron D
Great For Light Duty Home Use
Great for light to medium duty. Have this in my garage on a makeshift work bench I made out of an old table that was going to be thrown out. Bolted to table fairly easy with 4 carriage bolts, nuts and washers. Jaws open and close smoothly and hold whatever I am working on very well.
Scritto da: Simon
Good bang for the$
Good quality for the price and company as been around for a while. No it’s not a top brand but it’s a really good starting point that will last you years.
Scritto da: Harywood
A Nice Vice for a Good Price
My son wanted a vice for Christmas. I did some research and aside from the expensive Record vises, the Yost provides good features and performance at an affordable price. He's really happy with it.
Scritto da: Paul
Hapy with my Yost vise
I am very pleased with my Yost vise. Build-quality and precision seem to be very good, and the price was very competitive.

Liittyvät tuotteet

hot
Yost Vise Y18SS Vise Ruuvi
3.7/5

€ 120.20

Yost Vise Y18SS Vise Ruuvi
3.7/5

€ 120.20

hot

Tutustu kansainväliseen verkostoomme

Toimitamme 28 maahan, yli 200 000 tuotetta. Pysy ajan tasalla, tilaa uutiskirje.

Array