SharkBite 2-tums kulventil, tryck för att ansluta VVS-kopplingar i mässing, PEX-, koppar-, CPVC-, PE-RT- och HDPE-rör, UXLBV54 2 tum x 2 tums ventil

Name: SharkBite 2-tums kulventil, tryck för att ansluta VVS-kopplingar i mässing, PEX-, koppar-, CPVC-, PE-RT- och HDPE-rör, UXLBV54 2 tum x 2 tums ventil
Brand: SharkBite
SKU: 0697285039308
Price: 199.43 EUR
Availability: InStock

Brand:SharkBite

3.8/5

€
199.43

Anslut enkelt röret på några sekunder med SharkBite Push-To-Connect Fitting Reducer. Ena sidan har en CTS ändstyckesadapter, som kan skjutas in i vilken SharkBite som helst, och den andra har en SharkBite Push-to-Connect-ände. Utan lödning, klämmor eller lim krävs det så enkelt som att sätta in ditt rör i kopplingen. SharkBite-kopplingen är designad för applikationer för dricksvatten och strålningsvärme (inklusive applikationer under jord och bakom väggen). Beslag med stor diameter (1-1/4 till 2-tum) kräver en förstyvning (säljs separat) vid anslutning till PEX-rör.CUT. SKJUTA PÅ. KLAR. SharkBite Connection System gör alla VVS-projekt snabbt och enkelt tack vare unik push-to-connect-teknik. När du för in ett rör i en SharkBite snabbkoppling, biter kopplingens tänder i rostfritt stål fast och griper röret, medan dess speciella O-ring komprimeras för att skapa en vattentät tätning. SharkBite-produkter fungerar med ditt befintliga VVS, är lätta att demontera för att byta och återanvända beslag, och kan roteras för installation i trånga utrymmen. Oavsett om du behöver reparera ett trasigt rör eller plombera ett helt hus, erbjuder SharkBite en push-to-connect-lösning och läckagefria resultat.

Belopp

Lägg till i kundvagn Köp nu

EAN: 0697285039308

Kategorier Industri & vetenskap, Hydraulik, Pneumatik & VVS, Fittings, ventiler, Kulventiler,

CERTIFIERAD: Certifierad till 200 PSI och 200 grader F och kan återanvändas upp till 4 gånger. HÖG KVALITET: SharkBites kvalitet och prestanda är fältbeprövad med mer än 550 miljoner anslutningar; SharkBite är det enda push-to-connect-märket som kan säkerställa rena, läckagefria anslutningar. BLYFRI: Tillverkad av högkvalitativ smidd DZR-mässing som är blyfri. MÅNGSIDIG: SharkBite-kopplingsreducerande VVS-kopplingar passar koppar-, CPVC-, PE-RT- och PEX-rör. INSTALLERAS PÅ SEKUNDER: Inga specialverktyg, lödning, krympning eller lim - tryck bara för att skapa en vattentät tätning.

Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Color	Brass
Color	‎Brass
Connector Type	Reducer
Connector Type	‎Reducer
Country of Origin	‎USA
Customer Reviews	4.8 4.8 out of 5 stars 4,621 ratings 4.8 out of 5 stars
Exterior Finish	UXLBV54
Exterior Finish	‎UXLBV54
Finish	‎DZR Lead Free Brass
Included Components	‎Ball Nose End Mill
Item Dimensions LxWxH	17.15 x 13.15 x 11.15 inches
Item Dimensions LxWxH	‎17.15 x 13.15 x 11.15 inches
Item model number	‎UXLBV54
Item Package Quantity	‎1
Item Weight	1 Pounds
Item Weight	‎1 Pounds
Manufacturer	‎Cash Acme
Material	Stainless Steel
Material	‎Stainless Steel
Measurement System	‎Metric
Part Number	‎UXLBV54
Product Dimensions	‎17.15 x 13.15 x 11.15 inches
Size	2 in. x 2 in.
Size	‎2 in. x 2 in.
Style	‎Valve
Thread Size	2 inch
Thread Size	‎2 inch
Usage	‎Used to shut-off water flow for servicing and making repairs. Compatible with PEX copper, CPVC, PE-RT and HDPE pipe.

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din recension

Din e-post kommer inte att publiceras. Alla obligatoriska fält är markerade med^*

Ditt betyg

Scritto da: Mr. Dellbrook

First time using a push on ball valve

I added a shut off to the hot water exit pipe from the existing hot water heater. I did not want to do a solder joint because trying to rid all the dripping water from soldering process is a pain. For the 3/4 ball valve, I removed a 1-5/16" section of the existing copper pipe to insert the new push on fitting valve. With water turned back on....no joint leak!

Scritto da: meoff

NO MORE SWEATING

Had doubts at first but after reading reviews I replaced one outside valve and have to say that this is the best thing to come along since toilet paper!

Scritto da: Susan

Great product

Love the shark bite connectors.

Scritto da: Richard

You can do it!

No special skills needed. Pipe cutter or hacksaw and sandpaper. Clean off paint or corrosion. Cut out old valve. Push to connect new valve. Save a fortune.

Scritto da: mongoose

Works great

No leaks, easy push on install. Can’t ask for more.

Scritto da: james m.

Check size

Works well

Scritto da: Clinton A.

Can't beat a shark bite.

This was an easy install to replace an old shut off valve

Scritto da: fatty

Works Great!

Used this as a main water shut off to my house. It's operation is very smooth. The reason I used this shark bite valve is that it is easy to remove and replace if need be. The one I had installed years ago has lead in it which I just found out, and is not for potable water. Since it's well water and I have RO drinking water, I was not drinking the water but wanted to remove the valve for obvious reasons. This terrific valve will make future replacements a breeze without cutting pipes. I also used the fitting that converts from PVC to CPVC from well to house.

Scritto da: Amazon Customer

Easy install, does what it should.

Easy to install and works as it should. Well designed and quality manufacturing .

Scritto da: alcar

Shut the front tap!

I've been meaning (for 8 years now) to run a water line from our house into our attached garage. The main reason was for our fridge ice maker but I also wanted a hose access for those winter months. I finally decided to tackle the project. These are simply amazing. So easy to use and super fast. Once you prep your line properly, you simply push the line in the fitting, make sure it's seated all the way and Done! No more soldering. These are amazing especially for close quarters. Even if you mess up, you can simply remove them and fix your error. I have this one at the end of a temporary line that will go out the side of the garage this summer for an outside hose. (all the way to right of image) It's acting as cap right now but will be used to shut off the outside water during the winter months. Overall, these are a lifesaver. I know many people say these type of fittings don't last but I've seen homes that have had them for years with no leaks. I took a chance with these and I'm confident they will last a long time (hopefully forever). I highly recommend these especially if plumbing is not your thing. Pros: Super easy to install reusable solid, no leaks full brass fitting Cons: costly compared to normal fittings can only re-use so many times

Scritto da: Amazon Customer

unit easy to install

works like they say

Scritto da: J.R.

Easy to install

Wow, I am impressed at how easy this was to install on an existing line. And I have the coordination and manual dexterity of a 2-year-old. I wanted to put a shut off valve to the waterline feeding my outside faucet and prevent the line from freezing over during the winter. This works very well. Just push the line into the valve (with some force) until it no longer goes further in, do the same for the other side, you're done... well, clean the floor from some water dripping because you did not put a towel to catch it, and you're done! I would NOT have paid full price for this, but the discounted price made it a great purchase

Scritto da: ali a.

Easy to install

Good one